Ease of Conversion
• No need to open system, unless to make repairs. No need to replace o-rings seals or hoses. Unlike any other retrofit methods, PAG Plus rejuvenates and conditions o-rings and seals and stops porosity leaks in rubber hoses. There is no need to remove existing mineral oil in the A/C System. Successful retrofit can be performed in less than 1 hour.

Thermal Efficiency
• Vent temperatures will be as least as cool as an R12 system.

Universal
• Works on both R12 and R22 systems. Compatible with all existing lubricants present in the system. No guess work as to quantity and type of lubricant to inject into the system. Works on all makes of passenger vehicles and light trucks.

Simplicity
• No need to open system. There is no need to change lines, seals, o-rings, gaskets, and receiver drier. Disposable injector, with pre-measured 2 ounces of PAG Plus retrofitting additive. No need to determine system lubrication requirements (type or quantity). Works and blends with existing lubricant in system to be compatible with 134A refrigerant, and fully lubricate the system.

• Cliplight's Retrofit System saves you time and money. Simply remove the R12 or R22 refrigerant using approved recycling equipment, inject the retrofit conditioner through the low side service port of the A/C system, install the retrofit fittings on the system's ports, and recharge the system with R134a. The Retro-Stick is ideal to use in conjunction with Super Seal Plus, they can be installed together during the same operation.

Kit Includes:
• 1 - Retrofit Conditioner Injector
• 1 - Low Side 7/16" Retrofit Fitting
• 1 - High Side 3/8" Retrofit Fitting
• 1 - Service Sticker
• For use with CL775, CL912 or CL934A hose

© 2008 Stampede Tool Warehouse, Inc. All rights reserved.

Contact Us