• The FL90I-610S is compatible with any Fluke ScopeMeter Test Tool, Power Harmonics Analyzer, Oscilloscope, Multimeter, or other voltage measurement device that has the following features: BNC input connectors or if using a meter a BNC to banana plug adapter (included) lets you use this probe with your DMM.

• Current Range: 2 to 600 A DC or AC Peak

• Basic Accuracy (DC to 400 Hz): +/- (2% of reading + 1 A)

• Output Signal: 100 A range: 10 mV/A | 600 A range: 1 mV/A Frequency Range: 40 Hz to 400 Hz

• Working Voltage: 600 V AC rms

• Maximum Conductor Diameter: 34 mm (1.34 inch)

• Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V

© 2008 Stampede Tool Warehouse, Inc. All rights reserved.

Contact Us