|
 |
|
|
General Technologies Corp. / Sheffield Research Division TA100 Smartach+ : Wireless Tachometer and Ignition Tester
Enlarge Image |
 |
Tachometer function:
• For 1 to 12 cylinders and 2 or 4 cycle engines.
• Measures from 200 to 20000 RPM on a 4-1/2 digits LCD display.
• Advanced microcontroller technology yields 0.5 % accuracy.
• No sighting of rotating parts or hook-up required.
• Works on DIS, Conventional, Magneto and most spark ignition system.
Secondary Ignition Tester:
• Instant digital readings from 0 to 40000 Volt.
• Special antenna sensor allows quick hook-up to spark plug and ignition coil wires.
• No ground wire connections required, for fast troubleshooting.
• Multiple diagnostic applications are described in comprehensive User's Handbook (Included).
Simple and easy to use.
Tachometer: Set the number of cylinders and cycles, extend the antenna and hold the instrument about a foot above the ignition system. RPM is displayed.
Secondary Ignition Voltage Tester: Hook the antenna sensor over a spark plug wire or coil. Peak voltage of the ignition pulse in kilovolts is displayed.
|
Product Features
- Display: Large 4-1/2 Digits LCD
- Tachometer Range: 200 to 19999 RPM
- # of Cylinders: 1,2,3,4,5,6,8,10 and 12
- Cycles: 2 and 4 Cycles
- Accuracy: ± 0.5%
- Response time: 0.5 Seconds
- Ignition peak voltage range: 0 to 39.9 KVolt.
- Antenna: Collapsible 5 sections with capacitive sensor pick up.
- Secondary ignition pick up: Capacitive sensor.
- Spark Ignition System: Distributor, Magneto and D.I.S.
- Power Source: One standard 9 Volt alkaline battery type NEDA 1604 IEC 6F 22.
- Battery life: Approx. 200 hours of operation.
- Power Saving: Auto power off after approximately 3 min. of inactivity.
- Physical dimensions: 2.75" W x 5.35" L x 1" D - ( 69.9 x 135.9 x 25.4 mm )
|
|
|
|
© 2008 Stampede Tool Warehouse, Inc. All rights reserved.
|
Contact Us
|
|
|
Login
Rapid Reorder
